BSESSEND=0, LINESTATESTABLE=0, ID=0, SESS_VLD=0, AVBUSVLD=0
OTG Status register
AVBUSVLD | A VBUS Valid 0 (0): The VBUS voltage is below the A VBUS Valid threshold. 1 (1): The VBUS voltage is above the A VBUS Valid threshold. |
BSESSEND | B Session End 0 (0): The VBUS voltage is above the B session end threshold. 1 (1): The VBUS voltage is below the B session end threshold. |
SESS_VLD | Session Valid 0 (0): The VBUS voltage is below the B session valid threshold 1 (1): The VBUS voltage is above the B session valid threshold. |
LINESTATESTABLE | Indicates that the internal signals that control the LINE_STATE_CHG field of OTGISTAT are stable for at least 1 ms 0 (0): The LINE_STAT_CHG bit is not yet stable. 1 (1): The LINE_STAT_CHG bit has been debounced and is stable. |
ONEMSECEN | This bit is reserved for the 1ms count, but it is not useful to software. |
ID | Indicates the current state of the ID pin on the USB connector 0 (0): Indicates a Type A cable is plugged into the USB connector. 1 (1): Indicates no cable is attached or a Type B cable is plugged into the USB connector. |